Crown molding is one of the easiest and inexpensive ways to add value and visual interest for your home. With the help of basic carpentry knowledge and tools, you can easily achieve the stylish upgrade. If you are having question about how to install crown molding then you can follow some tips that could be really beneficial to you. Before you start the installation, you must need specific things such as miter saw, paintable caulk, tape measure, safety glasses, and crown molding. Initially, you should go over the basic crown molding cuts. There are types of the cuts available like outside corner, inside corner and overlapping or scarf.
Installing crown molding on the cabinets
As we know, hardest part of crown molding installation is that cutting the corners. In such kind of situation, using coping saw is considered as best and easiest way to cut the corners because coped joint could be tighter rather than mitered joint. At the same time, coping saw is the excellent option for beginner. If you are having question about how to install crown molding then you can follow the instructions that could be really useful to you. When it comes to the insider corner cut then bottom edge might be long as well top edge will short. On the other hand, outside corner cut bottom edge might be short and top edge will long. Scarf joint could be used to hide where two pieces of the molding meet on long wall. There are pre mitered corners available in the hardware depots which are in different designs and size.
